Ipv6 Mld Snooping Querier (Vlan Mode); Ipv6 Mld Snooping Querier Address - Dell PowerConnect 8024 Cli Reference Manual

ipv6 mld snooping querier (VLAN mode)

Use the ipv6 mld snooping querier command in VLAN mode to enable MLD Snooping Querier
on a VLAN. Use the "no" form of this command to disable MLD Snooping Querier on a VLAN.
Syntax
ipv6 mld snooping querier
no ipv6 mld snooping querier
vlan-id — A valid VLAN ID. (Range: 1–4093)
•
Default Configuration
MLD Snooping Querier is disabled by default on all VLANs.
Command Mode
VLAN Database mode
User Guidelines
There are no user guidelines for this command.
Example
console(config-vlan)#ipv6 mld snooping querier 10

ipv6 mld snooping querier address

Use the ipv6 mld snooping querier address command to set the global MLD Snooping Querier
address. Use the "no" form of this command to reset the global MLD Snooping Querier address
to the default.
Syntax
ipv6 mld snooping querier address
no ipv6 mld snooping querier address
prefix — The bits of the address to be configured.
•
prefix-length — Designates how many of the high-order contiguous bits of the address make
•
up the prefix.
Default Configuration
There is no global MLD Snooping Querier address configured by default.
318
IPv6 MLD Snooping Querier Commands
vlan-id
vlan-id
prefix /prefix-length
[ ]