PIM-SM Commands
This chapter explains the following commands:
•
ip pimsm
•
ip pimsm spt-threshold
•
ip pim-trapflags
•
show ip pimsm
•
show ip pimsm interface
•
show ip pimsm neighbor
•
show ip pimsm rphash
ip pimsm
Use the ip pimsm command in Global Configuration mode to set administrative mode of PIM-
SM multicast routing across the router to enabled. IGMP must be enabled before PIM-SM can
be enabled.
Syntax
ip pimsm
no ip pimsm
Default Configuration
PIM-SM is disabled by default.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example enables PIM-SM on the router.
console(config)#ip pimsm
51
PIM-SM Commands
833