Show Ip Ospf Abr; Show Ip Ospf Area - Dell PowerConnect 8024 Cli Reference Manual

show ip ospf abr

The show ip ospf abr command displays the internal OSPF routing table entries to Area Border
Routers (ABR). This command takes no options.
Syntax
show ip ospf abr
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
console#show ip ospf abr
Type Router Id
----- ---------
INTRA 3.3.3.3
INTRA 4.4.4.4

show ip ospf area

Use the show ip ospf area command in Privileged EXEC mode to display information about the
identified OSPF area.
Syntax
show ip ospf area area-id
area-id — Identifies the OSPF area whose ranges are being displayed. (Range: 0–4294967295)
•
Default Configuration
This command has no default configuration.
Cost Area ID
----- --------------- ---------
1 0.0.0.1
10 0.0.0.1
Next Hop Next Hop
Intf
--------
10.1.23.3 vlan11
10.1.24.4 vlan12
OSPF Commands
763