Show Copper-Ports Tdr - Dell PowerConnect 8024 Cli Reference Manual

1/g1
1/g2
1/g3
1/g4 Fiber

show copper-ports tdr

Use the show copper-ports tdr command in Privileged EXEC mode to display the last Time
Domain Reflectometry (TDR) tests on specified ports.
Syntax
show copper-ports tdr [
interface — A valid Ethernet port. The full syntax is unit / port.
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
The copper-related commands do not apply to the stacking or CX-4 ports associated with these
plug-in modules.
The maximum length of the cable for the Time Domain Reflectometry (TDR) test is 120
meters.
NOTE: This command is only supported on
Example
The following example displays the last TDR tests on all ports.
console#show copper-ports tdr
Port Result
---- --------
1/g1 OK
1/g2 Short
1/g3 Test has not been preformed
972
PHY Diagnostics Commands
<50
Copper not active
110-140
interface
]
Length [meters]
---------------
50
PC8024/PC8024F 10G BaseT ports.
Date
---------------
13:32:00 23 July 2004