Rmon Event; Show Rmon Alarm - Dell PowerConnect 8024 Cli Reference Manual

rmon event

Use the rmon event command in Global Configuration mode to configure an event. To remove
an event, use the no form of this command. Also see the show rmon events command.
Syntax
rmon event
no rmon event
index — The event index. (Range: 1–65535)
•
type — The type of notification that the device generates about this event. Can have the
•
following values: none, log, trap, log-trap. In the case of log, an entry is made in the log table
for each event. In the case of trap, an SNMP trap is sent to one or more management stations.
• community
by this octet string. (Range: 0-127 characters)
• description
• owner
name is an empty string.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example configures an event with the trap index of 10.
console(config)#rmon event 10 log

show rmon alarm

Use the show rmon alarm command in User EXEC mode to display alarm configuration. Also
see the rmon alarm command.
Syntax
show rmon alarm
978
RMON Commands
index type
[community
index
text — If an SNMP trap is to be sent, it is sent to the SNMP community specified
text — A comment describing this event. (Range 0-127 characters)
name — Enter a name that specifies who configured this event. If unspecified, the
number
text text
] [description
name
] [owner ]