Clock Commands
This chapter explains the following commands:
•
clock set
•
show clock
•
show sntp configuration
•
show sntp status
•
sntp authenticate
•
sntp authentication-key
•
sntp broadcast client enable
•
sntp client poll timer
•
sntp server
•
sntp trusted-key
•
sntp unicast client enable
•
clock timezone hours-offset
•
no clock timezone
•
clock summer-time recurring
•
clock summer-time date
•
no clock summer-time
clock set
Use the clock set command in Global Configuration mode to set the current date and time.
NOTE: The clock time cannet be set while SNTP client admin mode is enabled.
Syntax
clock set {[<mm/dd/yyyy>] | [<hh:mm:ss>] }
Default Configuration
This command has no default configuration.
59
911
Clock Commands