Script Validate - Dell PowerConnect 8024 Cli Reference Manual

script show
Use the script show command in Privileged EXEC mode to display the contents of a script file.
Syntax
script show
scriptname — Name of the script file to be displayed. (Range: 1-31 characters)
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the contents of the script file
console#script show config.scr
interface ethernet 1/g1
ip address 176.242.100.100 255.255.255.0
exit

script validate

Use the script validate command in Privileged EXEC mode to validate a script file by parsing
each line in the script file.The validate option is intended for use as a tool in script
development. Validation identifies potential problems though it may not identify all problems
with a given script.
Syntax
script validate
scriptname — Name of the script file being validated. (Range: 1-31 characters)
•
Default Configuration
This command has no default configuration.
934
Configuration and Image File Commands
scriptname
scriptname
config.scr
.