Show Ip Vrrp Interface - Dell PowerConnect 8024 Cli Reference Manual

Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
The following example displays VRRP's enabled status.
console#show ip vrrp
Admin Mode..................................... Enable
Router Checksum Errors......................... 0
Router Version Errors.......................... 0
Router VRID Errors............................. 0

show ip vrrp interface

Use the show ip vrrp interface command in Privileged EXEC mode to display all configuration
information and VRRP router statistics of a virtual router configured on a specific interface.
Syntax
show ip vrrp interface vlan
vlan-id — Valid VLAN ID.
•
vr-id — The virtual router identifier. (Range: 1-255)
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
vlan-id vr-id
Virtual Router Redundancy Protocol Commands
871