Show Rmon Log - Dell PowerConnect 8024 Cli Reference Manual

Field Description
Fragments The total number of packets received during this sampling interval that were less than 64
octets in length (excluding framing bits but including FCS octets) had either a bad
Frame Check Sequence (FCS) with an integral number of octets (FCS Error), or a bad
FCS with a non-integral number of octets (AlignmentError). It is normal for
etherHistoryFragments to increment because it counts both runts (which are normal
occurrences due to collisions) and noise hits.
Jabbers The number of packets received during this sampling interval that were longer than 1518
octets (excluding framing bits but including FCS octets), and had either a bad Frame
Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with
a non-integral number of octets (Alignment Error).
Dropped The total number of events in which packets were dropped by the probe due to lack of
resources during this sampling interval. This number is not necessarily the number of
packets dropped. It is just the number of times this condition has been detected.
Collisions The best estimate of the total number of collisions on this Ethernet segment during this
sampling interval.

show rmon log

Use the show rmon log command in User EXEC mode to display the RMON logging table.
Syntax
event
show rmon log [ ]
event — Event index. (Range: 1–65535)
•
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following examples display the RMON logging table.
console> show rmon log
Maximum table size: 100
Event Description Time
987
RMON Commands