Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
The following example displays all configuration information about the virtual router on the
selected interface.
console#show ip vrrp interface brief
Interface VRID IP Address
--------- ---- -------------- ------
vlan1
2
vlan2
5
show ip vrrp interface stats
Use the show ip vrrp interface stats command in User EXEC mode to display the statistical
information about each virtual router configured on the switch.
Syntax
show ip vrrp interface stats vlan
vlan-id — Valid VLAN ID.
•
vr-id — The virtual router identifier. (Range: 1-255)
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Mode
0.0.0.0
Disable Initialize
192.168.5.55
Enable
vlan-id vr-id
Virtual Router Redundancy Protocol Commands
State
------------
Initialize
873