(config)#ipv6 router ospf
(config-rtr)#area 1 virtual-link 2 retransmit-interval 20
area virtual-link transmit-delay
Use the area virtual-link transmit-delay command in Router OSPFv3 Configuration mode to
configure the transmit delay for the OSPF virtual interface on the virtual interface identified by
areaid
neighbor
and
.
Syntax
areaid
area
virtual-link
areaid
no area
virtual-link
areaid — Valid OSPFv3 area identifier.
•
neighbor — Router ID of neighbor.
•
seconds — Transmit delay interval. (Range: 0-3600)
•
Default Configuration
1 is the default value for
Command Mode
Router OSPFv3 Configuration mode.
User Guidelines
This command has no user guidelines.
Example
The following example configures a 20-second transmit delay for the OSPF virtual interface on
the virtual interface identified by area 1 and its neighbor.
console(config)#ipv6 router ospf
console(config-rtr)#area 1 virtual-link 2 transmit-delay 20
default-information originate
Use the default-information originate command in Router OSPFv3 Configuration mode to
control the advertisement of default routes. Use the no form of the command to return the
default route advertisement settings to the default value.
neighbor
transmit-delay
neighbor
transmit-delay
seconds
.
seconds
OSPFv3 Commands
795