Ip Pim-Trapflags; Ip Pimsm Spt-Threshold - Dell PowerConnect 8024 Cli Reference Manual

ip pimsm spt-threshold

Use the ip pimsm spt-threshold command in Global Configuration mode to configure the Data
Threshold rate for the last-hop (or leaf) router to switch to the shortest path. The rate is
specified in kilobits per second.
Syntax
threshold
ip pimsm spt-threshold
no ip pimsm spt-threshold
threshold — Threshold rate. (Range: 0-2000 kilobits/sec)
•
Default Configuration
50 kilobits/sec is the default rate.
Command Mode
Global Configuration mode.
User Guidelines
This command has no user guidelines.
Example
The following example configures a threshold rate of 100 kilobits/sec.
console(config)#ip pimsm spt-threshold 100

ip pim-trapflags

Use the ip pim-trapflags command in Global Configuration mode to enable the PIM trap mode
for both Sparse Mode (SM) and Dense Mode (DM).
Syntax
ip pim-trapflags
no ip pim-trapflags
Default Configuration
Disabled is the default state.
Command Mode
Global Configuration mode.
834
PIM-SM Commands