Area Nssa No-Summary; Area Nssa Translator-Role - Dell PowerConnect 8024 Cli Reference Manual

area nssa no-summary

Use the area nssa no-summary command in Router OSPF Configuration mode to configure the
NSSA so that summary LSAs are not advertised into the NSSA.
Syntax
area-id
area
area-id
no area
area-id — Identifies the OSPF NSSA to configure. (Range: 0–4294967295)
•
Default Configuration
This command has no default configuration.
Command Mode
Router OSPF Configuration mode.
User Guidelines
This command has no user guidelines.
Example
The following example configures the NSSA so that summary LSAs are not advertised into the
NSSA.
console(config-router)#area 20 nssa no-summary

area nssa translator-role

Use the area nssa translator-role command in Router OSPF Configuration mode to configure
the translator role of the NSSA.
Syntax
area-id
area
area-id
no area
area-id — Identifies the OSPF NSSA to configure. (Range: IP address or decimal from
•
0–4294967295)
• always — The router assumes the role of the translator when it becomes a border router.
• candidate — The router to participate in the translator election process when it attains border
router status.
732
OSPF Commands
nssa no-summary
nssa no-summary
nssa translator-role {always | candidate}
nssa translator-role