Show Interfaces Detail - Dell PowerConnect 8024 Cli Reference Manual

Command Mode
User EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the description for the interface 1/g1.
console>show interfaces description
Port Description
---- -----------------------------------------------------------
1/g1 Port that should be used for management only
2/g1
2/g2
Ch Description
---- -----------
1 Output

show interfaces detail

Use the show interfaces detail command in User EXEC mode to display, in a single command,
VLAN information, STP information, and port status information. This command combines
the output of the following commands:
• show interfaces configuration [ethernet interface | port-channel port-channel-number]
show interfaces description [ethernet interface | port-channel port-channel-number]
•
• show interfaces status [ethernet interface | port-channel port-channel-number ]
• show interfaces switchport {ethernet interface | port-channel port-channel-number}
• show spanning-tree [ ethernet interface-number | port-channel port-channel-number
][instance instance-id]
Syntax
show interfaces detail {ethernet
interface — A valid Ethernet port.
•
250
Ethernet Configuration Commands
interface
| port-channel
port-channel-number
}