Dell PowerConnect 8024 Cli Reference Manual page 95

Routing Information Protocol
Command
auto-summary
default-information originate
default-metric
distance rip
distribute-list out
enable
hostroutesaccept
ip rip
ip rip authentication
ip rip receive version
ip rip send version
redistribute
router rip
show ip rip
show ip rip interface
show ip rip interface brief
split-horizon
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 51.
Description
Enables the RIP auto-summarization mode.
Controls the advertisement of default routes.
Sets a default for the metric of distributed routes.
Sets the route preference value of RIP in the router.
Specifies the access list to filter routes received from the
source protocol.
Resets the default administrative mode of RIP in the router
(active).
Enables the RIP hostroutesaccept mode.
Enables RIP on a router interface.
Sets the RIP Version 2 Authentication Type and Key for the
specified interface.
Configures the interface to allow RIP control packets of the
specified version(s) to be received.
Configures the interface to allow RIP control packets of the
specified version to be sent.
Configures OSPF protocol to allow redistribution of routes
from the specified source protocol/routers.
Enters Router RIP mode.
Displays information relevant to the RIP router.
Displays information related to a particular RIP interface.
Displays general information for each RIP interface.
Sets the RIP split horizon mode.
Mode*
RIP
RIP
RIP
RIP
RIP
RIP
RIP
IC
IC
IC
IC
PIP
GC
PE
PE
PE
RIP
95
Command Groups