Dell PowerConnect 8024 Cli Reference Manual page 1064

<190> JUN 24 04:30:09 0.0.0.0-1 UNKN[151591376]:
hpc_local_sensors.c(424) 3 %% Temperature Status Change, current = 2,
previous = 1 FanSpeed set to: 7020
<190> JUN 24 04:30:09 0.0.0.0-1 UNKN[151591376]:
hpc_local_sensors.c(463) 4 %% Power Supply 0 Status : OK
<190> JUN 24 04:30:10 0.0.0.0-1 UNKN[151591376]:
hpc_local_sensors.c(466) 5 %% Power Supply 1 Status : Not present
<189> JUN 24 04:30:13 0.0.0.0-1 SNMP[213198592]: edb.c(380) 6 %%
EDB Callback: Unit Join: 1. A new unit has joined the stack.
<190> JUN 24 04:30:16 192.168.2.1-1 UNITMGR[179923056]:
unitmgr.c(5866) 8 %% No Potential unit to configure as Standby when unit 1
joined
<189> JUN 24 04:30:29 192.168.2.1-1 TRAPMGR[429716240]:
traputil.c(615) 9 %% Power supply state change alarm: Power supply ID: 0
Event: 3
<190> JUN 24 04:30:40 192.168.2.1-1 UNKN[151591376]:
hpc_local_sensors.c(424) 10 %% Temperature Status Change, current = 3,
previous = 2 FanSpeed set to: 7980
<189> JUN 24 04:31:16 192.168.2.1-1 TRAPMGR[185656768]:
traputil.c(615) 11 %% Cold Start: Unit: 0
<189> JUN 24 04:31:17 192.168.2.1-1 TRAPMGR[222525488]:
traputil.c(615) 12 %% Unit 1 is the new stack master, Old stack master
unit is 0
<189> JUN 24 04:31:17 192.168.2.1-1 TRAPMGR[222525488]:
traputil.c(615) 13 %% Link Up: 1/0/10
<189> JUN 24 04:31:17 192.168.2.1-1 TRAPMGR[222525488]:
traputil.c(615) 14 %% Entity Database: Configuration Changed
<189> JUN 24 04:31:17 192.168.2.1-1 TRAPMGR[222525488]:
traputil.c(615) 15 %% Powersupply 0 has changed the state on unit 1 to 1
<190> JUN 24 04:31:20 192.168.2.1-1 UNKN[151829440]:
dhcp_support.c(493) 16 %% dhcp_bind(): networkPort dhcpstate failed
<190> JUN 24 04:31:35 10.131.10.165-1 UNKN[421562880]:
auto_install_control.c(175) 17 %% AutoInstall : received options from
DHCP/BOOTP
1064
Syslog Commands