Show Ipv6 Ospf; Router-Id - Dell PowerConnect 8024 Cli Reference Manual

User Guidelines
This command has no user guidelines.
Example
The following example configures the OSPFv3 protocol to allow redistribution of routes from
the specified source protocol/routers.
console(config)#ipv6 router ospf
console(config-rtr)#redistribute connected

router-id

Use the router-id command in Router OSPFv3 Configuration mode to set a 4-digit dotted-
decimal number uniquely identifying the Router OSPF ID.
Syntax
router-id
router-id
router-id — Router OSPF identifier. (Range: 0-4294967295)
•
Default Configuration
This command has no default configuration.
Command Mode
Router OSPFv3 Configuration mode.
User Guidelines
This command has no user guidelines.
Example
The following example sets a 4-digit dotted-decimal number identifying the Router OSPF ID as
2.3.4.5.
console(config)#ipv6 router ospf
console(config-rtr)#router-id 2.3.4.5

show ipv6 ospf

Use the show ipv6 ospf command in Privileged EXEC mode to display information relevant to
the OSPF router.
810
OSPFv3 Commands