Distance Ospf - Dell PowerConnect 8024 Cli Reference Manual

Default Configuration
This command has no default configuration.
Command Mode
Router OSPFv3 Configuration mode.
User Guidelines
This command has no user guidelines.
Example
The following example sets a default of 100 for the metric of distributed routes.
console(config)#ipv6 router ospf
console(config-rtr)#default-metric 100

distance ospf

The distance ospf command sets the preference values of OSPF route types in the router. Lower
route preference values are preferred when determining the best route. The type of OSPF route
can be intra, inter, external. All the external type routes are given the same preference value. Use
the "no" form of this command to reset the preference values to the default.
Syntax
distance ospf {external | inter-area | intra-area }
no distance ospf {external | inter-area | intra-area }
distance — Used to select the best path when there are two or more routes to the same
•
destination from two different routing protocols (Range: 1–255).
Default Configuration
The default preference value is 110.
Command Mode
Router OSPF Configuration mode.
Router OSPFv3 Configuration mode.
User Guidelines
There are no user guidelines for this command.
distance
distance
OSPFv3 Commands
797