Arp Cachesize; Arp Dynamicrenew - Dell PowerConnect 8024 Cli Reference Manual

User Guidelines
This command has no user guidelines.
Example
The following example creates an ARP entry consisting of an IP address and a MAC address.
console(config)#arp 192.168.1.2 00A2.64B3.A245

arp cachesize

Use the arp cachesize command in Global Configuration mode to configure the maximum
number of entries in the ARP cache. To return the maximum number ARP cache entries to the
default value, use the no form of this command.
Syntax
integer
arp cachesize
no arp cachesize
integer — Maximum number of ARP entries in the cache. (Range: 256–1024)
•
Default Configuration
The default integer value is 896.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example defines an arp cachesize of 500.
console(config)#arp cachesize 500

arp dynamicrenew

Use the arp dynamicrenew command in Global Configuration mode to enable the ARP
component to automatically renew dynamic ARP entries when they age out. To disable the
automatic renewal of dynamic ARP entries when they age out, use the no form of the command.
Syntax
arp dynamicrenew
552
ARP Commands