External-Lsdb-Limit - Dell PowerConnect 8024 Cli Reference Manual

no exit-overflow-interval
seconds — Exit overflow interval for OSPF (Range: 0-2147483647)
•
Default Configuration
0 is the default value for
Command Mode
Router OSPFv3 Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example configures the exit overflow interval for OSPF at 100 seconds.
console(config)#ipv6 router ospf
console(config-rtr)#exit-overflow-interval 100

external-lsdb-limit

Use the external-lsdb-limit command in Router OSPFv3 Configuration mode to configure the
external LSDB limit for OSPF. If the value is -1, then there is no limit. When the number of
non-default AS-external-LSAs in a router's link-state database reaches the external LSDB limit,
the router enters overflow state. The router never holds more than the external LSDB limit non-
default ASexternal- LSAs in it database. The external LSDB limit MUST be set identically in all
routers attached to the OSPF backbone and/or any regular OSPF area.
Syntax
limit
external-lsdb-limit
no external-lsdb-limit
limit — External LSDB limit for OSPF (Range: -1-2147483647)
•
Default Configuration
-1 is the default value for
Command Mode
Router OSPFv3 Configuration mode.
seconds
.
limit
.
OSPFv3 Commands
799