Match Dstip6 - Dell PowerConnect 8024 Cli Reference Manual

Default Configuration
This command has no default configuration.
Command Mode
Class-Map Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example displays adding a match condition using the specified IP address and bit
mask.
console(config-classmap)#match dstip 10.240.1.1 10.240.0.0

match dstip6

The match dstip6 command adds to the specified class definition a match condition based on
the destination IPv6 address of a packet.
Syntax
match dstip6
destination-ipv6-prefix —IPv6 prefix in IPv6 global address format.
•
prefix-length — IPv6 prefix length value.
•
Default Configuration
There is no default configuration for this command.
Command Mode
Ipv6-Class-Map Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
console(config-classmap)#match dstip6 2001:DB8::/32
402
QoS Commands
destination-ipv6-prefix/prefix-length