Ipv6 Nd Other-Config-Flag - Dell PowerConnect 8024 Cli Reference Manual

Syntax
milliseconds
ipv6 nd ns-interval
no ipv6 nd ns-interval
milliseconds — Interval duration. (Range: 0, 1000–4294967295)
•
Default Configuration
milliseconds
0 is the default value for .
Command Mode
Interface Configuration (VLAN, Tunnel, Loopback) mode
User Guidelines
This command has no user guidelines.
Example
The following example sets the interval between router advertisements for advertised neighbor
solicitations at 5000 ms.
console(config)#interface vlan 15
console(config-if-vlan15)#ipv6 nd ns-interval 5000

ipv6 nd other-config-flag

Use the ipv6 nd other-config-flag command in Interface Configuration mode to set the "other
stateful configuration" flag in router advertisements sent from the interface.
Syntax
ipv6 nd other-config-flag
no ipv6 nd other-config-flag
Default Configuration
False is the default configuration.
Command Mode
Interface Configuration (VLAN, Tunnel, Loopback) mode
User Guidelines
This command has no user guidelines.
668
IPv6 Routing Commands