Show Ipv6 Ospf Virtual-Link Brief - Dell PowerConnect 8024 Cli Reference Manual

areaid — Identifies the OSPF area whose virtual interface information is being displayed.
•
neighbor — Router ID of neighbor.
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
The following example displays the OSPF Virtual Interface information for area 1 and its
neighbor.
console#show ipv6 ospf virtual-link 1 1.1.1.1
Area ID........................................ 1
Neighbor Router ID............................. 1.1.1.1
Hello Interval................................. 10
Dead Interval.................................. 40
Iftransit Delay Interval....................... 1
Retransmit Interval............................ 5
State.......................................... point-to-point
Metric......................................... 10
Neighbor State................................. Full

show ipv6 ospf virtual-link brief

Use the show ipv6 ospf virtual-link brief command in Privileged EXEC mode to display the
OSPFV3 Virtual Interface information for all areas in the system.
Syntax
show ipv6 ospf virtual-link brief
Default Configuration
This command has no default configuration.
826
OSPFv3 Commands