Show Ports Security Addresses - Dell PowerConnect 8024 Cli Reference Manual

---- ------
1/g1 Locked Discard
1/g2 Unlocked -
1/g3 Locked Discard, Shutdown
The following table describes the fields in this example.
Field
Port
Status
Actions
Maximum
Trap
Frequency

show ports security addresses

Use the show ports security addresses command in Privileged EXEC mode to display current
dynamic addresses in locked ports.
Syntax
show ports security addresses {ethernet
interface — Valid Ethernet port
•
port-channel-number — Valid port-channel number
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
----------------- -------- ------- -------
Description
The port number.
The status can be one of the following: Locked or
Unlocked.
Action on violations.
The maximum addresses that can be associated on this port
in Static Learning mode or in Dynamic Learning mode.
Indicates if traps would be sent in case of violation.
The minimum time between consecutive traps.
interface
3 Enable
28 -
8 Disable
port-channel-number
|port-channel
Address Table Commands
100
-
-
}
183