Dell PowerConnect 8024 Cli Reference Manual page 1038

Syntax
snmp-server user
password
sha
des-key
key
no snmp-server user
• username — Specifies the name of the user on the host that connects to the agent. (Range: 1-
30 characters.)
groupname — Specifies the name of the group to which the user belongs. (Range: 1-30
•
characters.)
engineid-string — Specifies the engine ID of the remote SNMP entity to which the user
•
belongs. The engine ID is a concatenated hexadecimal string. Each byte in the hexadecimal
character string is two hexadecimal digits. The remote engine id designates the remote
management station, and should be defined to enable the device to receive
acknowledgements to "informs." (Range: 5-32 characters.)
• auth-md5 — The HMAC-MD5-96 authentication level.
• auth-sha — The HMAC-SHA-96 authentication level.
password — A password. (Range: 1 to 32 characters.)
•
• auth-md5-key — The HMAC-MD5-96 authentication level. Enter a pregenerated MD5 key.
• auth-sha-key — The HMAC-SHA-96 authentication level. Enter a pregenerated SHA key.
md5-key — Character string
•
sha-key — Character string
•
• priv-des — The CBC-DES Symmetric Encryption privacy level. Enter a password.
• priv-des-key — The CBC-DES Symmetric Encryption privacy level. The user should enter a
pregenerated MD5 or SHA key depending on the authentication level selected.
des-key — The pregenerated DES encryption key. Length is determined by authentication
•
method selected
SHA Authentication is selected.
Default Configuration
No user entry exists.
Command Mode
Global Configuration mode
User Guidelines
If the SNMP local engine ID is changed, configured users will no longer be able to connect and
will need to be reconfigured.
1038
SNMP Commands
username groupname
md5-key
| auth-md5-key
] ]
username
—
—
32 hex characters if MD5 Authentication is selected, 48 hex characters if
—
engineid-string
[remote
sha-key
| auth-sha-key
length 32 hex characters.
length 48 characters.
password
] [ { auth-md5
password
} [priv-des | priv-des-
| auth-