Gvrp Registration-Forbid - Dell PowerConnect 8024 Cli Reference Manual

Command Mode
Interface Configuration (Ethernet, Port-Channel) mode
User Guidelines
An Access port cannot join dynamically to a VLAN because it is always a member of only one
VLAN.
Membership in untagged VLAN would be propagated in a same way as a tagged VLAN. In such
cases it is the administrator's responsibility to set the PVID to be the untagged VLAN VID.
Example
The following example enables GVRP on ethernet 1/g8.
console(config)#interface ethernet 1/g8
console(config-if-1/g8)#gvrp enable

gvrp registration-forbid

Use the gvrp registration-forbid command in Interface Configuration mode to deregister all
VLANs on a port and prevent any dynamic registration on the port. To allow dynamic registering
for VLANs on a port, use the no form of this command.
Syntax
gvrp registration-forbid
no gvrp registration-forbid
Default Configuration
Dynamic registering and deregistering for each VLAN on the port is not forbidden.
Command Mode
Interface Configuration (Ethernet, Port-Channel) mode
User Guidelines
This command has no user guidelines.
Example
The following example shows how default dynamic registering and deregistering is forbidden for
each VLAN on port 1/g8.
console(config)#interface ethernet 1/g8
console(config-if-1/g8)#gvrp registration-forbid
270
GVRP Commands