Ip Address Vlan; Ip Default-Gateway - Dell PowerConnect 8024 Cli Reference Manual

Cli reference guide
Hide thumbs Also See for PowerConnect 8024:
Table of Contents

Advertisement

console(config-if)#ip address dhcp
console(config-if)#ip address none
console(config)#interface out-of-band
console(config-if)#ip address 10.240.4.115 255.255.255.0
10.240.4.1

ip address vlan

Use the ip address vlan command in Global Configuration mode to set the management VLAN.
Syntax
ip address vlan
no ip address vlan
vlanid — vlan identification. (Range 1–4093)
Default Configuration
The default configuration value is 1.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example sets VLAN 5 as management VLAN.
console(config)#ip address vlan 5

ip default-gateway

Use the ip default-gateway command in Global Configuration mode to define a default gateway
(router).
Syntax
ip default-gateway
ip-address — Valid IP address that specifies the IP address of the default gateway.
298
IP Addressing Commands
vlanid
ip-address

Advertisement

Table of Contents
loading

Table of Contents