Hashing-Mode - Dell PowerConnect 8024 Cli Reference Manual

port-channel-range — List of port-channels to configure. Separate non-consecutive port-
•
channels with a comma and no spaces. A hyphen designates a range of port-channels. (Range:
valid port-channel)
• all — All the channel-ports.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
Commands in the interface range context are executed independently on each interface in the
range. If the command returns an error on one of the interfaces, it stops the execution of the
command on subsequent interfaces.
Example
The following example shows how port-channels 1, 2 and 8 are grouped to receive the same
command.
console(config)# interface range port-channel 1-2,8
console(config-if)#

hashing-mode

Use the hashing-mode command to set the hashing algorithm on trunk ports.
Syntax
mode
hashing-mode
mode — Mode value in the range of 1 to 6.
•
Range: 1–6:
• 1 — Source MAC, VLAN, EtherType, source module, and port ID
• 2 — Destination MAC, VLAN, EtherType, source module, and port ID
• 3 — Source IP and source TCP/UDP port
• 4 — Destination IP and destination TCP/UDP port
• 5 — Source/destination MAC, VLAN, EtherType, and source MODID/port
• 6 — Source/destination IP and source/destination TCP/UDP port
Port Channel Commands
377