Rmon Collection History - Dell PowerConnect 8024 Cli Reference Manual

console(config)#rmon alarm 1 1.3.6.1.2.1.2.2.1.1.10.5 10 50000 10 1 1

rmon collection history

Use the rmon collection history command in Interface Configuration mode to enable a Remote
Monitoring (RMON) MIB history statistics group on an interface. To remove a specified RMON
history statistics group, use the no form of this command. Also see the show rmon collection
history command.
Syntax
rmon collection history
no rmon collection history
index — The requested statistics index group. (Range: 1–65535)
•
ownername — Records the RMON statistics group owner name. If unspecified, the
• owner
name is an empty string.
bucket-number — A value associated with the number of buckets specified for the
• buckets
RMON collection history group of statistics. If unspecified, defaults to 50. (Range: 1 - 65535)
interval seconds — The number of seconds in each polling cycle. If unspecified, defaults to
•
1800. (Range: 1–3600)
Default Configuration
The buckets configuration is 50. The interval configuration is 1800 seconds.
Command Mode
Interface Configuration (Ethernet, Port-Channel) mode.
User Guidelines
This command cannot be executed on multiple ports using the interface range ethernet
command.
Example
The following example enables a Remote Monitoring (RMON) MIB history statistics group on
port 1/g8 with the index number "1" and a polling interval period of 2400 seconds.
console(config)#interface ethernet 1/g8
console(config-if-1/g8)#rmon collection history 1 interval 2400
index ownername
[owner
index
bucket-number
] [buckets
RMON Commands
seconds
] [interval ]
977