Permit Ip Host Mac Host - Dell PowerConnect 8024 Cli Reference Manual

Cli reference guide
Hide thumbs Also See for PowerConnect 8024:
Table of Contents

Advertisement

Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(config)#ip arp inspection vlan 200-300
console(config)#ip arp inspection vlan 200-300 logging

permit ip host mac host

Use the permit ip host mac host command to configure a rule for a valid IP address and MAC
address combination used in ARP packet validation. Use the "no" form of this command to
delete an ARP ACL rule.
Syntax
permit ip host
no permit ip host
sender-ip — Valid IP address used by a host.
sender-mac —Valid MAC address in combination with the above sender-ip used by a host.
Default Configuration
There are no ARP ACL rules created by default.
Command Mode
ARP Access-list Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(Config-arp-access-list)#permit ip host 1.1.1.1 mac host
00:01:02:03:04:05
228
Dynamic ARP Inspection Commands
sender-ip
sender-mac
max host
sender-ip
max host
sender-mac

Advertisement

Table of Contents
loading

Table of Contents