Channel-Group - Dell PowerConnect 8024 Cli Reference Manual

Port Channel Commands
This chapter explains the following commands:
•

channel-group

• interface port-channel
• interface range port-channel
• hashing-mode
• no hashing-mode
• show interfaces port-channel
• show statistics port-channel
channel-group
Use the channel-group command in Interface Configuration mode to configure a port-to-port
channel. To remove the channel-group configuration from the interface, use the no form of this
command.
Syntax
port-channel-number
channel-group
no channel-group
port-channel-number — Number of a valid port-channel for the current port to join.
•
on — Forces the port to join a channel without LACP.
•
• auto — Forces the port to join a channel with LACP.
Default Configuration
This command has no default configuration.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
This command has no user guidelines.
mode {on|auto}
Port Channel Commands
25
375