Show Ip Pimsm - Dell PowerConnect 8024 Cli Reference Manual

User Guidelines
This command has no user guidelines.
Example
The following example enables PIM trap mode.
console(config)#ip pim-trapflags

show ip pimsm

Use the show ip pimsm command in Privileged EXEC mode to display the system-wide
information for PIM-SM.
Syntax
show ip pimsm
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
The following example displays the system-wide information for PIM-SM.
console#show ip pimsm
Admin Mode..................................... Disable
Join/Prune Interval (secs)..................... 60
Data Threshold Rate (Kbps)..................... 50
Register Threshold Rate (Kbps)................. 50
PIM-SM INTERFACE STATUS
Interface Interface Mode
--------- --------------
Protocol State
--------------
PIM-SM Commands
835