Gvrp Enable (Interface) - Dell PowerConnect 8024 Cli Reference Manual

Example
The following example sets the leave timer for port 1/g8 to 90 centiseconds.
console (config)# interface ethernet 1/g8
console (config-if-1/g8)# garp timer leave 90
gvrp enable (global)
Use the gvrp enable (global) command in Global Configuration mode to enable GVRP globally
on the switch. To disable GVRP globally on the switch, use the no form of this command.
Syntax
gvrp enable
no gvrp enable
Default Configuration
GVRP is globally disabled.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example globally enables GVRP on the device.
console(config)#gvrp enable

gvrp enable (interface)

Use the gvrp enable command in Interface Configuration mode to enable GVRP on an
interface. To disable GVRP on an interface, use the no form of this command.
Syntax
gvrp enable
no gvrp enable
Default Configuration
GVRP is disabled on all interfaces by default.
269
GVRP Commands