Classofservice Dot1P-Mapping - Dell PowerConnect 8024 Cli Reference Manual

Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example displays how to change the name of a DiffServ class from "DELL " to
"DELL1."
console(config)#class-map rename DELL DELL1
console(config)#

classofservice dot1p-mapping

Use the classofservice dot1p-mapping command in Global Configuration mode to map an
802.1p priority to an internal traffic class. In Interface Configuration mode, the mapping is
applied only to packets received on that interface. Use the no form of the command to remove
mapping between an 802.1p priority and an internal traffic class.
Syntax
classofservice dot1p-mapping
no classofservice dot1p-mapping
802.1ppriority — Specifies the user priority mapped to the specified traffic class for this
•
switch. (Range: 0–7)
trafficclass — Specifies the traffic class for this switch. (Range: 0–6)
•
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration or Interface Configuration (Ethernet, Port-channel) mode
User Guidelines
None
802.1ppriority trafficclass
391
QoS Commands