Level - Dell PowerConnect 8024 Cli Reference Manual

Default Configuration
This command has no default value.
Command Mode
Logging mode
User Guidelines
After entering the view corresponding to a specific syslog server, the command can be executed
to set the description of the server.
Example
The following example sets the syslog server description.
console(config-logging)#description "syslog server 1"

level

Use the level command in Logging mode to specify the importance level of syslog messages. To
reset to the default value, use the no form of the command.
Syntax
level
level
no level
level — The level number for syslog messages. (Range: emergency, alert, critical, error,
•
warning, notice, info, debug)
Default Configuration
level
The default value for
Command Mode
Logging mode
User Guidelines
After entering the view corresponding to a specific syslog server, the command can be executed
to set the importance level for syslog messages.
Example
The following example sets the syslog message importance level to alert.
console(config-logging)#level alert
is info.
1055
Syslog Commands