Ip Pimsm Dr-Priority; Ip Pimsm Hello-Interval - Dell PowerConnect 8024 Cli Reference Manual

ip pimsm dr-priority

The ip pimsm dr-priority command is used to set the priority value for which a router is elected
as the designated router (DR). Use the "no" form of this command to set the priority to the
default.
Syntax
priority
ip pimsm dr-priority
no ip pimsm dr-priority
priority — The election priority (Range: 0–2147483647).
•
Default Configuration
The default election priority is 1.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
There are no user guidelines for this command.
Example
console(config-if-vlan3)#ip pimsm dr-priority 12

ip pimsm hello-interval

The ip pimsm hello-interval command is used to configure the PIM-SM Hello Interval for the
specified interface. Use the "no" form of this command to set the hello interval to the default.
This command deprecates the ip pimsm query-interval command.
Syntax
ip pimsm hello-interval
no ip pimsm hello-interval
interval — The hello interval (Range: 0–65535 seconds).
•
Default Configuration
The default hello interval is 30 seconds.
Command Mode
Interface Configuration (VLAN) mode
interval
Multicast Commands
711