------------------
Port 1 (1/xg1) enabled
State: Forwarding Role: Root
Port id: 128.1 Port cost: 20000
Port Fast: No (configured:no)
Designated bridge Priority: 32768 Address: 00:01:42:97:e0:00
Designated port id: 128.25 Designated path cost: 0
BPDU: sent 2, received 120638
show interfaces status
Use the show interfaces status command in User EXEC mode to display the status for all
configured interfaces.
Syntax
show interfaces status [ethernet
interface — A valid Ethernet port.
•
port-channel-number — A valid port-channel trunk index.
•
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the status for all configured interfaces.
console#show interfaces status
Port
Type
-----
------------------------------
1/g1
Gigabit - Level
interface
| port-channel
Duplex
Speed
------
-------
N/A
Unknown
Ethernet Configuration Commands
port-channel-number
Neg
Link
Flow Control
State Status
---- ----- -------
Auto Down
Inactive
]
253