ip igmp query-interval
Use the ip igmp query-interval command in Interface Configuration mode to configure the
query interval for the specified interface. The query interval determines how fast IGMP Host-
Query packets are transmitted on this interface.
Syntax
ip igmp query-interval
no ip igmp query-interval
seconds — Query interval. (Range: 1-3600)
•
Default Configuration
The default query interval value is 125 seconds.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
This command has no user guidelines.
Example
The following example configures a 10-second query interval for VLAN 15.
console(config)#interface vlan 15
console(config-if-vlan15)#ip igmp query-interval 10
ip igmp query-max-response-time
Use the ip igmp query-max-response-time command in Internet Configuration mode to
configure the maximum response time interval for the specified interface. It is the maximum
query response time advertised in IGMPv2 queries on this interface. The time interval is
specified in tenths of a second.
Syntax
ip igmp query-max-response-time
no ip igmp query-max-response-time
tenthsofseconds — Maximum response time. (Range: 0-255 seconds)
•
596
seconds
tenthsofseconds