Show Ip Mcast Mroute Source - Dell PowerConnect 8024 Cli Reference Manual

console#show ip mcast mroute group 224.5.5.5 detail
Multicast Route Table
Source Ip Group Ip
--------- --------- ----------- --------- --------------- -----

show ip mcast mroute source

Use the show ip mcast mroute source command in Privileged EXEC mode to display the
multicast configuration settings such as flags, timer settings, incoming and outgoing interfaces,
RPF neighboring routers, and expiration times of all the entries in the multicast mroute table
sourceipaddr
containing the
Syntax
show ip mcast mroute source
sourceipaddr — IP address of source.
•
groupipaddr — IP address of multicast group.
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
The following example displays multicast configuration settings.
console#show ip mcast mroute source 10.1.1.1 summary
Multicast Route Table Summary
Source IP Group IP
---------- --------------- --------- --------- ----------------
Expiry Up Time
Time(secs) (secs)
sourceipaddr groupipaddr
or |
sourceipaddr
{summary |
Protocol
RPF Neighbor
pair value(s).
groupipaddr
}
Incoming Outgoing
Interface Interface List
Multicast Commands
Flags
721