Logging Facility; Logging File - Dell PowerConnect 8024 Cli Reference Manual

Example
The following example limits messages logged to the console based on severity level "alert".
console(config)#logging console alert

logging facility

Use the logging facility command in Global Configuration mode to set the facility for logging
messages. To reset to the default value, use the no form of the command.
Syntax
facility
logging facility
no logging facility
facility — The facility that will be indicated in the message. (Range: local0, local1, local2,
•
local3, local4, local5, local 6, local7)
Default Configuration
The default value is local7.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example sets the logging facility as local3.
console(config)#logging facility local3

logging file

Use the logging file command in Global Configuration mode to limit syslog messages sent to
the logging file based on severity. To cancel the buffer, use the no form of this command.
Syntax
level
logging file
no logging file
• level — Limits the logging of messages to the buffer to a specified level. (Range: emergency,
alert, critical, error, warning, notice, info, debug)
1059
Syslog Commands