groupName — The group name you want to add.The group name can be up to 16 characters
•
in length using any valid alphanumeric characters.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
console(config)#vlan protocol group name 1 usergroup
vlan protocol group remove
Use the vlan protocol group remove command in Global Configuration mode to remove the
protocol-based VLAN group identified by
Syntax
vlan protocol group remove
groupid — The protocol-based VLAN group ID, which is automatically generated when you
•
create a protocol-based VLAN group with the vlan protocol group command. To see the
group ID associated with the name of a protocol group, use the show port protocol all
command.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the removal of the protocol-based VLAN group identified as "2."
console(config)#vlan protocol group remove 2
520
VLAN Commands
groupid
.
groupid