show ipv6 ospf abr
This command displays the internal OSPFv3 routes to reach Area Border Routers (ABR). This
command takes no options.
Syntax
show ipv6 ospf abr
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode.
User Guidelines
This command has no user guidelines.
Example
console#show ipv6 ospf abr
Type
Router Id
----
INTRA
3.3.3.3
INTRA
4.4.4.4
show ipv6 ospf area
Use the show ipv6 ospf area command in Privileged EXEC mode to display information about
the area.
Syntax
show ipv6 ospf area
areaid — Identifier for the OSPF area being displayed.
•
Default Configuration
This command has no default configuration.
812
OSPFv3 Commands
Cost
Area ID
--------
----
10
0.0.0.1
10
0.0.0.1
areaid
Next Hop
--------
-----------------------
FE80::211:88FF:FE2A:3CB3
FE80::210:18FF:FE82:8E1
Next Hop
Intf
-----
vlan11
vlan12