Default-Metric - Dell PowerConnect 8024 Cli Reference Manual

Syntax
default-information originate [always] [metric
no default-information originate [metric] [metric-type]
• always — Always advertise default routes.
integer — The metric (or preference) value of the default route. (Range: 1–16777214)
•
• 1 — External type-1 route.
• 2 — External type-2 route.
Default Configuration
The default metric is none and the default type is 2.
Command Mode
Router OSPF Configuration mode.
User Guidelines
This command has no user guidelines.
Example
The following example always advertises default routes.
console(config-router)#default-information originate always metric
100 metric-type 1

default-metric

Use the default-metric command in Router OSPF Configuration mode to set a default for the
metric of distributed routes. Use the no form of the command to remove the metric from the
distributed routes.
Syntax
default-metric
no default-metric
integer — The metric (or preference) value of the default route. (Range: 1–16777214)
•
Default Configuration
This command has no default configuration.
744
OSPF Commands
integer
integer
] [metric-type {1 | 2}]