Dynamic ARP Inspection Commands
This chapter explains the following commands:
•
arp access-list
•
clear counters ip arp inspection
•
ip arp inspection filter
•
ip arp inspection limit
•
ip arp inspection trust
•
ip arp inspection validate
•
ip arp inspection vlan
•
permit ip host mac host
•
show arp access-list
•
show ip arp inspection ethernet
•
show ip arp inspection statistics
•
show ip arp inspection vlan
arp access-list
Use the arp access-list command to create an ARP ACL. It will place the user in ARP ACL
Configuration mode. Use the "no" form of this command to delete an ARP ACL.
Syntax
acl-name
arp access-list
acl-name
no arp access-list
acl-name — A valid ARP ACL name (Range: 1–31 characters).
•
Default Configuration
There are no ARP ACLs created by default.
Command Mode
Global Configuration mode
Dynamic ARP Inspection Commands
12
223