Dell PowerConnect 8024 Cli Reference Manual page 1031

virt-packets } | state-change { all | if state change | neighbor state change | virtif state
change | virtneighbor state change }
}
ospfv3type - {
•
all |
errors { all | bad packet | config error | virt bad packet | virt config error } | lsa { all |
lsa-maxage | lsa-originate } | overflow { all| lsdb-overflow | lsdb-approaching-overflow
} | retransmit {all |packets| virt-packets } | state-change { all | if state change |
neighbor state change | virtif state change | virtneighbor state change }
}
Default Configuration
Authentication, Link Up/Down, Multiple Users and Spanning Tree flags are enabled by default.
Command Mode
Global Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the options for the snmp-server enable traps command.
console(config)#snmp-server enable traps ?
<cr>
acl
all
authentication
dvmrp
link
multiple-users
ospf
ospfv3
Press enter to execute the command.
acl
Enable/Disable all Traps.
To enable the device to send SNMP traps when
authentication fails.
dvmrp
Enable/Disable switch level Link Up/Down trap flag.
Enable/Disable sending traps when multiple logins
active.
Enable/Disable OSPF Traps.
Enable/Disable OSPF Traps.
1031
SNMP Commands