Show Ip Mcast Mroute Group - Dell PowerConnect 8024 Cli Reference Manual

console#show ip mcast mroute detail
Multicast Route Table
Source Ip Group Ip
--------- ----------- ---------- ----------- --------------- -----

show ip mcast mroute group

Use the show ip mcast mroute group command in Privileged EXEC mode to display the
multicast configuration settings such as flags, timer settings, incoming and outgoing interfaces,
RPF neighboring routers, and expiration times of all the entries in the multicast mroute table
containing the
Syntax
show ip mcast mroute group
groupipaddr — IP address of the multicast group.
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
The following example displays the multicast configuration settings such as flags, timer settings,
incoming and outgoing interfaces.
console#show ip mcast mroute group 224.5.5.5 summary
Multicast Route Table Summary
Source IP Group IP
--------- --------------- --------- --------- ----------------
720
Multicast Commands
Expiry
Time(secs) (secs)
groupipaddr
value.
groupipaddr
Up Time
{detail | summary}
Incoming
Protocol Interface Interface List
RPF Neighbor
Outgoing
Flags