Ip Routing - Dell PowerConnect 8024 Cli Reference Manual

Command Mode
Global Configuration mode
User Guidelines
Lower route distance values are preferred when determining the best route.
Example
The following example sets the default route metric to 80.
console(config)#ip route distance 80

ip routing

To globally enable IPv4 routing on the router, use the "ip routing" command in Global
Configuration mode. To disable IPv4 routing globally, use the no form of this command.
Syntax
ip routing
no ip routing
Default Configuration
The ip routing default configuration is disabled.
Command Mode
Global Configuration mode
User Guidelines
Use this command to globally enable IPv4 routing.
Example
console(config)#ip routing
routing
Use the routing command in Interface Configuration mode to enable IPv4 and IPv6 routing for
an interface. View the current value for this function with the show ip brief command. The
value is labeled Routing Mode in the output display. Use the no form of the command to disable
routing for an interface.
621
IP Routing Commands