Example
The following example displays the OSPF Virtual Interface information in the system.
console#show ipv6 ospf virtual-link brief
Area ID
-------
0.0.0.2
timers spf
Use the timers spf command in Router OSPF Configuration mode to configure the SPF delay
and hold time. Use the no form of the command to reset the numbers to the default value.
Syntax
timers spf
no timers spf
delay-time — SPF delay time. (Range: 0–65535 seconds)
•
hold-time — SPF hold time. (Range: 0–65535 seconds)
•
Default Configuration
The default value for
Command Mode
Router OSPF Configuration mode.
User Guidelines
This command has no user guidelines.
Example
The following example configures the SPF delay and hold time.
console(config-router)#timers spf 20 30
780
OSPF Commands
Hello
Neighbor
Interval Interval Interval
--------
-------- -------- ----------
5.5.5.5
10
delay-time hold-time
delay-time
is 5. The default value for
Dead
Retransmit
40
5
hold-time
Transit
Delay
--------
1
is 10.