Protocol Vlan Group - Dell PowerConnect 8024 Cli Reference Manual

groupid — The protocol-based VLAN group ID, which is automatically generated when you
•
create a protocol-based VLAN group with the vlan protocol group command. To see the
group ID associated with the name of a protocol group, use the show port protocol all
command.
vlanid — A valid VLAN ID.
•
Default Configuration
This command has no default configuration.
Command Mode
VLAN Database mode
User Guidelines
This command has no user guidelines.
Example
The following example displays how to attach the VLAN ID "100" to the protocol-based VLAN
group "3."
console#vlan database
console(config-vlan)#protocol group 3 100

protocol vlan group

Use the protocol vlan group command in Interface Configuration mode to add the physical
unit/port interface to the protocol-based group identified by
than one interface associated with it. Each interface and protocol combination can be
associated with one group only. If adding an interface to a group causes any conflicts with
protocols currently associated with the group, this command fails and the interface(s) are not
added to the group. Ensure that the referenced VLAN is created prior to the creation of the
protocol-based group except when GVRP is expected to create the VLAN.
To remove the interface from this protocol-based VLAN group that is identified by this
use the no form of this command.
If you select all, all ports are removed from this protocol group.
Syntax
protocol vlan group
no protocol vlan group
496
VLAN Commands
groupid
groupid
groupid
. A group may have more
groupid
,