Show Statistics Ethernet - Dell PowerConnect 8024 Cli Reference Manual

ch40 Link Aggregate
ch41 Link Aggregate
ch42 Link Aggregate
ch43 Link Aggregate
ch44 Link Aggregate
ch45 Link Aggregate
ch46 Link Aggregate
ch47 Link Aggregate
ch48 Link Aggregate
Flow Control:Disabled
console#
The displayed port status information includes the following:
Field
Port
Type
Duplex
Speed
Neg
Link State

show statistics ethernet

Use the show statistics ethernet command in Privileged EXEC mode to display detailed
statistics for a specific port or for the entire switch.
Syntax
show statistics ethernet { <
unit — Physical switch identifier within the stack. Values are 1-12 .
•
port-type — Values are xg for 10 gigabit Ethernet port.
•
port — port number. Values are 1-24 xg ports only.
•
Example: xg2 is the 10 gigabit Ethernet port 2.
256
Ethernet Configuration Commands
Description
The port number.
The port designated IEEE shorthand identifier. For example 1000Base-T refers to 1000
Mbps baseband signaling including both Tx and Rx transmissions.
Displays the port Duplex status.
Refers to the port speed.
Describes the Auto-negotiation status.
Displays the Link Aggregation status.
unit port-type
>/<
Down
Down
Down
Down
Down
Down
Down
Down
Down
port
>< > | switchport }